Approved animal by-product processing plants in Great Britain
Every rendering plant and animal by-product (ABP) processing plant operating in England, Scotland and Wales must be approved by the Animal and Plant Health Agency (APHA). The legal basis is the retained version of Regulation (EC) No 1069/2009 and its implementing Regulation (EU) No 142/2011, enforced through the Animal By-Products (Enforcement) Regulations in each nation. APHA publishes the approved premises as a workbook in the EU SANCO reporting format, split into thirteen sections. Section IV covers processing plants under Article 24(1)(a): the renderers and protein, fat and blood processors that sit between abattoirs, cutting plants and fish processors on one side, and feed, pet food, oleochemical, fertiliser and energy users on the other.
The November 2026 report lists roughly 54 distinct approval numbers in Section IV. That is a small, concentrated market: a handful of groups operate several approved lines on the same site, each line carrying its own approval and its own output product.
What the ABP category tells a buyer
| Category | Typical material | Permitted outlets after processing |
|---|---|---|
| Category 1 | Specified risk material, fallen stock carcases containing SRM, material from TSE-suspect animals | Incineration or co-incineration, use as fuel, biodiesel and some technical uses. Never feed or fertiliser. |
| Category 2 | Manure, digestive tract content, animals that died other than by slaughter (non-SRM), material failing residue checks | Organic fertilisers and soil improvers after pressure sterilisation (Method 1), biogas, composting, fuel and technical uses. |
| Category 3 | Parts of animals fit for human consumption at slaughter but not intended for it: hides, skins, bones, trimmings, blood, feathers, fish offcuts | Feed (including processed animal protein and rendered fats), pet food, collagen and gelatine raw material, oleochemicals, fertilisers. |
For collagen, gelatine and pet food manufacturers only Category 3 plants are a raw material source. Category 1 and 2 plants are relevant to buyers of tallow for fuel or biodiesel, and to anyone placing high-risk material that needs a compliant outlet. The register shows that Category 3 approvals dominate Section IV, with Category 1 and Category 2 approvals concentrated in a smaller set of large renderers.
Reading the activity and product codes
Each line of the APHA workbook carries an activity code and a product code inherited from the EU SANCO format. The ones that matter most in Section IV are:
PROCP- Processing plant, followed by the category it is approved for.
PAP- Processed animal protein: the meal fraction from Category 3 rendering, used mainly in pet food and, when derived from non-ruminant species under specific conditions, in aquafeed.
FATF/FATOT- Rendered fats and fish oil for feeding, versus rendered fats for purposes other than feeding or oleochemicals. The distinction decides whether a tallow lot can go to feed or only to technical and fuel uses.
MBM- Meat and bone meal, the Category 1 and 2 protein fraction that must be burned or used as fuel or fertiliser according to its category.
BLPF/BLPT- Blood products for feeding purposes, versus blood products for technical purposes.
A single site often appears several times because each approved line (for example a mammalian PAP line, a poultry by-products line and a blood line) is listed separately with its own product code.
Where the plants are
Mammalian and poultry rendering is spread across the English Midlands, Yorkshire, Lancashire, Cheshire and Cumbria, close to the major abattoir clusters. Fish meal and fish oil processing is concentrated at ports: Grimsby and Hull on the Humber, Plymouth, and Scottish sites around Aberdeen, Peterhead, Shetland and the west coast where salmon farming generates trimmings. Wales has a small number of approved plants. Location matters because ABP haulage is regulated and costly; the nearest approved plant for the right category is usually the commercial default.
How buyers use the register
- Collagen and gelatine makers qualify Category 3 renderers and hide or bone processors as raw material suppliers, and need the approval number on every commercial document accompanying the material.
- Pet food and aquafeed producers source PAP, rendered fats and fish oil and must confirm the supplying plant is approved for that product, not only for the category.
- Oleochemical and biodiesel producers buy Category 1 and Category 3 tallow and check the fat product code to separate feed-grade from technical-grade lots.
- Traders match surplus by-products from slaughterhouses and fish processors with plants approved to take that category and species.
Practical checks before trading
An approval number on an invoice is not enough on its own. Check that the plant line is approved for the category being moved, that the product code matches the material bought, and that the operator name on the register matches the legal entity on the contract: several plants trade under group names that differ from the registered operator. GB approvals are separate from EU approvals since 2021, so material moving to or from the EU needs the relevant third-country listing as well as the APHA approval.