TAF-accredited construction materials laboratories in Taiwan: how the register works
In Taiwan, material test reports for public works are expected to come from laboratories accredited by the Taiwan Accreditation Foundation (TAF, 財團法人全國認證基金會) to ISO/IEC 17025. TAF's own list of regulations that rely on its accreditation includes the Public Construction Commission's Directions for Quality Management of Public Construction (公共工程施工品質管理作業要點), and the National Land Management Agency of the Ministry of the Interior also relies on TAF for designating performance-test bodies for new building technologies and materials. For a foreign EPC contractor, an offshore wind developer or a fab construction QA team, the practical consequence is simple: if the owner's specification calls for a TAF-endorsed report, the subcontracted lab has to hold the right item in its accredited scope, not just a TAF logo on its website.
The civil engineering field (code 30)
TAF organises testing-laboratory accreditation by technical field. Construction materials sit under field L (營建, construction), in the category 30 土木工程 (civil engineering). On the TAF register in November 2026, 179 distinct laboratory numbers held at least one accredited item in this category. Scopes are granted item by item, so the depth varies widely between labs:
| Sub-area (TAF code) | Most common accredited item | Labs holding that item |
|---|---|---|
| Concrete (3003) | Compressive strength | 112 |
| Reinforcing steel (3017) | Steel bars for reinforced concrete | 112 |
| Cement (3001) | Compressive strength | 91 |
| Aggregates (3002) | Material finer than 75-μm sieve | 88 |
| Asphalt mixtures (3006) | Asphalt content | 84 |
| Soils (3004) | Moisture content | 77 |
| Concrete (3003) | Controlled low-strength material cylinders | 77 |
| Reinforcing steel (3017) | Rebar couplers | 75 |
| Pavement (3007) | Skid resistance | 58 |
| Road markings (3034) | Marking tests | 53 |
| Anchors and bearings (3018) | Anchorage strength | 29 |
| Bricks and tiles (3031) | Ordinary building bricks | 21 |
The long tail matters more than the headline numbers. Only a handful of labs carry curtain-wall items such as air tightness, water tightness and inter-storey drift (code 3035), geosynthetic tensile and tear tests (3012) or energy-dissipation device tests (3018). If a project needs one of these, the candidate pool is small and capacity should be booked early.
Who the laboratories are
- Independent commercial labs make up most of the field, and many hold a single laboratory number in one city or county.
- Multi-site groups such as SGS Taiwan and CECI Nova Technology hold separate laboratory numbers for each site, each with its own scope and validity dates.
- Public agencies, including the Highway Bureau's Material Technology Institute and the Taipei City Department of Rapid Transit Systems, run accredited labs for their own works.
- Universities (for example Cheng Shiu University and National Central University) operate accredited construction materials centres.
- Material producers such as cement, precast and ready-mix companies hold accreditation for in-house quality control.
Reading a TAF entry correctly
- Laboratory number
- A four-digit number (for example 0927) identifies the accredited laboratory site, not the parent company. One company can hold several numbers.
- Validity dates
- Each entry shows a start and end date of accreditation. For the concrete compressive-strength item, every entry on the register spans three years, after which reassessment is due.
- Item codes
- Codes such as 3003L036 combine the sub-area (3003, concrete) and the test item (L036, compressive strength). Matching these codes against the test list in your specification is the fastest way to qualify a lab.
- Standards
- Each accredited item is tied to a named test method. When an owner specifies an ASTM, EN or JIS method, confirm that the exact method number appears in the lab's accredited scope rather than an equivalent national method.
Practical selection advice for foreign contractors
- Map every test in the inspection and test plan to a TAF item code before contacting labs.
- Prefer a lab whose scope covers concrete, rebar and couplers together to reduce chain-of-custody steps.
- Check the end date of accreditation against the project schedule; a lab whose accreditation lapses mid-project forces a change of supplier.
- For offshore wind and port work in Changhua, Taichung and Kaohsiung, consider site distance: cylinder transport time affects curing and test timing.
- Ask whether reports will carry the TAF accreditation mark for the specific items tested; non-accredited items in the same report are not covered.
TAF is a signatory of the ILAC MRA, and in October 2025 it was admitted as a full member of the Global Accreditation Cooperation, so accredited Taiwanese test reports are recognised under the international arrangement for the accredited scope.