Aviation, Aerospace & Space Reservations open Page created Nov 9, 2026

List of EASA ETSO Authorisation Holders

Organisations holding EASA ETSO authorisations (ETSOAs) for aircraft parts and appliances — seats, ELTs, transponders, GNSS receivers, cargo ULDs, galley carts, wheels and survival equipment — with each holder's country, ETSO standards and authorised articles, for supplier shortlisting and competitor mapping.

Fields we plan to include

Holder (organisation) name
Country
ETSO standards held
Authorised articles (equipment descriptions)
ETSOA approval numbers
Date of last issue
DDP references
Part numbers covered
Holder address (as listed by EASA)
Number of ETSOAs per holder
Suspended authorisations

Data Preview

* Free sample rows, unverified and may contain errors. This list isn't for sale yet.
OrganizationCountryExample authorised articleETSO standard(s)
ACR ELECTRONICS, Inc.SourceUSAELT-1000C126A, C142A
AVIOINTERIORS S.p.A.SourceItalyPassenger SeatsC127A
TRIG AVIONICS EUROPE B.V.SourceNetherlandsKT74 Mode S TransponderC112D, C166B
NORDISK AVIATION PRODUCTS A.S.SourceNorwayAMX Air Cargo ContainerC90C
VIKING LIFE-SAVING EQUIPMENT A/SSourceDenmarkLife Jacket / PV93652C504

Estimated ~200 entries. If people reserve it, we'll try to compile it (we can't compile every list).

* No charge now. Purchase is optional.

EASA ETSO authorisation holders: what an ETSOA is and how to read EASA's list

An ETSO authorisation (ETSOA) is EASA's design and production approval for a part or appliance — a seat, an emergency locator transmitter, a transponder, a cargo container — that meets a European Technical Standard Order (ETSO) in CS-ETSO. It is granted under Part 21 Subpart O, which is why the approval numbers contain “21O”. The holder may produce the article and mark it with the ETSO number. An ETSOA is not an approval to install: the installer still needs an installation approval for the specific aircraft (a type certificate change, an STC or a minor change) and can claim credit from the ETSOA towards it.

What EASA's ETSOA report shows

EASA publishes the authorisations it has issued as a single PDF report sorted by holder name. The edition dated 28 July 2026 runs to 608 pages in four chapters: changes since the previous list, the complete list of ETSO authorisations, the authorisations of holders based in China, and suspended authorisations. Each line gives the holder's name and address, the approval number, the date of last issue, a description of the equipment, the ETSO standard(s), the reference of the Declaration of Design and Performance (DDP) and the part numbers covered.

The report is organised by authorisation, not by supplier. An authorisation that covers two standards appears on two lines, and one holder, GARMIN INTERNATIONAL, Inc., accounts for roughly two-fifths of the lines in the complete list. Group names also split into several holders of record — SAFRAN SEATS, SAFRAN SEATS USA LLC and SAFRAN LANDING SYSTEMS are separate entries. Behind the complete list there are roughly 200 distinct holders.

Typical ETSO articles and example holders

ETSO standardArticleHolders in the 28 July 2026 report include
C127Seating systems (passenger and crew seats)AVIOINTERIORS S.p.A., GEVEN S.P.A., ZIM AIRCRAFT SEATING GMBH, IPECO HOLDINGS LIMITED
C126, 2C126406 MHz emergency locator transmittersACR ELECTRONICS, Inc., EXAIL AEROSPACE
C112, C166Mode S transponders and 1090 MHz ADS-B equipmentTRIG AVIONICS EUROPE B.V., BECKER AVIONICS GmbH, TQ-SYSTEMS GMBH
C145, C146SBAS GNSS navigation sensors and stand-alone navigation equipmentGARMIN INTERNATIONAL, Inc., HONEYWELL INTERNATIONAL, Inc.
C90Cargo pallets, nets and containers (ULDs)NORDISK AVIATION PRODUCTS A.S., AVIUSULD B.V., PALNET GmbH AIR CARGO PRODUCTS, ENVIROTAINER ENGINEERING AB
C175Galley carts and containersINDUSTRIAL NEOTEX S.A., IACOBUCCI HF AEROSPACE S.p.A., EGRET AVIATION CO., Ltd.
C26Wheels, brakes and wheel/brake assembliesBERINGER AERO S.A.S., SAFRAN LANDING SYSTEMS
2C503, 2C504Immersion suits and constant-wear lifejackets for helicopter flights to helidecks in a hostile sea areaVIKING LIFE-SAVING EQUIPMENT A/S, HANSEN PROTECTION A/S, SWITLIK PARACHUTE COMPANY Inc.

How to read ETSO numbers

  • ETSO-C… (Index 1 of CS-ETSO): technically similar to the FAA TSO with the same number, so ETSO-C127 seats and ETSO-C145 GNSS sensors correspond to FAA TSO-C127 and TSO-C145, although detailed differences can remain and are worth checking before installation.
  • ETSO-2C… (Index 2): standards that are not technically similar to an FAA TSO or have no FAA counterpart, such as ETSO-2C504 constant-wear lifejackets. Older lines may also cite JTSO numbers from before EASA.
  • Revision letters (C127A and C127B, C90C and C90D, C112D and C112E) identify the edition of the standard the design was shown against. Holders of the same article type often sit on different revisions, which matters when a specification calls for a minimum revision.
  • Gaps: some lines show “(Null)” or “OTHER” instead of a standard number, so the equipment description and the DDP are needed to tell what the article is.

Where the holders are

Holders based in the USA form the largest group. Germany, France and Great Britain (the report's label for UK holders) come next, and together these four countries account for most of the list. The rest are spread across Italy, the Netherlands, China, the Czech Republic, Spain, Switzerland, Norway, Poland, Turkey, Japan and several other countries.

Approval numbers carry history too. Authorisations of holders outside the EASA member states — US, Japanese and Chinese manufacturers — are mostly numbered EASA.IM.21O…, while holders in EASA member states carry EASA.21O… numbers, and a minority of lines still show older national numbers with prefixes such as LBA, ENAC or CAA. For holders in Great Britain the switch is visible in the dates: lines issued up to 2020 carry EASA.21O… numbers and lines issued from 2021 carry EASA.IM.21O… numbers, consistent with the UK leaving the EU aviation safety system at the end of 2020.

US manufacturers and reciprocal acceptance

Nearly all lines for US holders carry a last-issue date of 2016 or earlier. That is expected: since revision 5 of the EU–US Technical Implementation Procedures (2 March 2016, later replaced by revision 6 of 22 September 2017), EASA accepts an FAA TSO authorisation for a US article without issuing an ETSOA, and the FAA accepts EASA ETSOAs without issuing its own Letter of TSO Design Approval. For newer US designs the FAA TSOA is the record to check; EASA's report mainly shows US holders' earlier authorisations.

Shortlisting suppliers from ETSOA holders

  1. Start from the standard your specification calls for and note the minimum revision you accept.
  2. Identify the holder of record. The authorisation sits with one legal entity — the KT74 Mode S transponder authorisation, for example, is held by TRIG AVIONICS EUROPE B.V. in the Netherlands — and that entity's DDP and marking are what you rely on.
  3. Ask for the DDP of the part numbers you plan to buy. Under Part 21 (21.A.608) it identifies the article and its design and test standard, states the rated performance where appropriate and the level of compliance where the ETSO allows several, and lists any deviations accepted under 21.A.610.
  4. Check the suspended chapter of EASA's report before relying on an authorisation.
  5. Plan the installation approval separately: credit from the ETSOA counts towards it but does not replace it.

Frequently Asked Questions

Q.Is an ETSO authorisation the same as an installation approval?

No. An ETSOA approves the article against its ETSO. Installing it on a specific aircraft needs a separate approval — a change to the type certificate, an STC or a minor change — and the installer can claim credit from the ETSOA when showing that the installation meets the aircraft's certification basis.

Q.What must an applicant demonstrate to obtain an ETSOA?

Production capability, normally by holding a production organisation approval under Part 21 Subpart G or by working under the Subpart F procedures, and design capability, by documented procedures for the ETSO process and for classifying and approving design changes. For auxiliary power units a design organisation approval is required.

Q.What is the difference between ETSO-C and ETSO-2C standards?

CS-ETSO Index 1 (ETSO-C numbers) contains standards that are technically similar to the FAA TSO of the same number. Index 2 (ETSO-2C numbers) contains standards that are not technically similar to an FAA TSO or have no FAA equivalent — for example ETSO-2C504, which sets minimum standards for constant-wear lifejackets used on helicopter flights to and from helidecks in a hostile sea area.

Q.Can I buy the list now?

Not yet. Sample rows are free. We try to compile lists that people reserve (we can't compile every list). If we do, we'll email everyone who reserved it a purchase link (buying is optional). If we don't, nothing happens and you're never charged.

Q.What does it cost?

Sample rows are free. A list is $49, paid only if we compile it and you decide to buy. There is no free trial or subscription.