UK Part 145 organisations approved for non-destructive testing
Under the UK's retained Part 145 rules, an aircraft maintenance organisation's approval is split into classes and ratings. Class A covers whole aircraft, class B engines and APUs, class C components, and class D specialised services. The only class D rating, D1 Non-Destructive Testing, is what allows an organisation to perform NDT and certify it as maintenance on aircraft and components released under a UK Part 145 approval. For a quality manager subcontracting an inspection, the D1 rating and the methods listed against it are the first thing to check, because an NDT house that is accredited for manufacturing or industrial inspection is not automatically able to sign for maintenance work.
Where the D1 rating is recorded
The UK Civil Aviation Authority publishes its approved airworthiness organisations as PDF registers, split into UK-based Part 145 organisations and overseas organisations holding a UK Part 145 approval. Each entry gives the approval reference in the form UK.145.xxxxx, the address and approved sites, the CAA regional office, the approval date, the current maintenance organisation exposition (MOE) issue, and one line per rating. A D1 entry names the individual method, so the register shows whether an organisation is approved for, say, eddy current and ultrasonic but not radiography.
In the November 2026 registers, roughly 33 UK-based organisations and around 100 overseas organisations carry a D1 line. The UK figure is small relative to the total of more than 280 UK Part 145 approvals, which is why finding the right subcontractor from the registers is slow: the D1 lines sit among thousands of aircraft-type and component ratings across well over a hundred pages.
Two kinds of D1 holder
- Specialist NDT houses hold D1 and little or nothing else. In the UK register, Aerospace NDT, Morgan-Ward (NDT), Testia and Applus UK hold no class A, B or C ratings at all. These are the organisations that typically take inspection work in from other MROs, operators and lessors, and often send inspectors to the customer's hangar.
- MROs with in-house NDT hold D1 alongside aircraft, engine or component ratings: airline engineering departments, landing-gear and propeller overhaul shops, and engine centres. Some will sell spare NDT capacity; many use D1 only to support their own work packages.
NDT methods on UK Part 145 approvals
| Method | Typical maintenance use |
|---|---|
| Eddy current (ET) | Surface and near-surface cracks around fastener holes, wheels, and bolt holes; conductivity checks after heat damage |
| Liquid / dye penetrant (PT) | Surface-breaking cracks on non-porous parts, common in component and landing-gear overhaul |
| Magnetic particle (MT) | Cracks in ferromagnetic steel parts such as landing-gear and engine-mount components |
| Ultrasonic (UT) | Subsurface flaws, corrosion thickness, and disbonds in composite and bonded structure |
| Radiography (RT) | Internal inspection of structure and assemblies where access is limited |
| Thermography (IRT) | Disbonds, water ingress and impact damage in composite structure |
Checking a subcontractor before you place work
- Confirm the approval reference is current in the latest CAA register and that the D1 line lists the exact method you need.
- Check the approved sites: on-wing or in-hangar inspection at your base must be covered by the organisation's procedures, while bench work happens at its listed sites.
- Ask for the NDT personnel qualification basis. Part 145 requires NDT staff to be qualified to an appropriate standard, which in practice means EN 4179 levels and a responsible Level 3.
- For work on aircraft registered outside the UK, check whether the organisation also holds an EASA, FAA or other approval, since a UK D1 rating alone may not satisfy a foreign authority.
Overseas holders matter for operators flying UK-registered aircraft abroad: an NDT-rated shop in the Netherlands, Germany, Malaysia or the Gulf with a UK Part 145 approval can certify inspections on UK-registered aircraft without a separate arrangement.