Who holds a UK Part 145 helicopter rating
Since the UK left the EASA system, maintenance of UK-registered helicopters used in commercial air transport, including offshore crew change and helicopter emergency medical services (HEMS), must be released by an organisation approved by the UK Civil Aviation Authority under UK Part 145. The approval is not a single permission: each organisation receives a schedule of ratings, and only an A3 (Helicopters) aircraft rating allows it to perform base or line maintenance on complete rotorcraft. Engine (B), component (C) and specialised service (D) ratings can exist with or without A3, so many shops that overhaul gearboxes, starter-generators or avionics for helicopters do not hold A3 at all.
How the CAA publishes the approvals
The CAA publishes its approved airworthiness organisations as a set of PDF reports, refreshed periodically. The UK Part 145 report covers roughly 210 UK-based organisations; separate reports cover UK Part 145 holders based overseas (European OEMs and MROs that maintain UK-registered aircraft), US-based FAR 145 stations accepted under the UK-US bilateral, and Brazil-based RBAC holders. Each entry lists the reference number (UK.145.xxxxx), address, CAA regional office, approval date, maintenance sites, the current Maintenance Organisation Exposition issue, and every rating line. In the November 2026 edition, about 34 UK-based and about 18 overseas organisations carry at least one A3 line, which is the population this page describes. Several of those A3 entries are narrow, for example limited to avionics installation or to light inspections.
Reading the A3 schedule
- Type-specific lines name a type or series, such as AGUSTA AB139/AW139, SIKORSKY S-92A, AIRBUS HELICOPTERS EC175B or BELL 505. These are what an operator of that type needs to see.
- Group ratings such as SINGLE PISTON ENGINE HELICOPTERS or SINGLE TURBINE ENGINE (helicopters) allow work on any type in that group, typically Robinson R22/R44, Guimbal Cabri, AS350 or Bell 206 families, within the limits written in the exposition.
- Limitations may appear beside a line, for example a check interval limit or a restriction to B2 (avionics) work only. A rating with a limitation is not equivalent to full base maintenance capability.
Market structure
The A3 population splits into three groups. Offshore operators (Bristow, CHC Scotia, Offshore Helicopter Services UK) hold approvals focused on AW139, AW189, S-92A and EC175B fleets, with approvals registered at Aberdeen, and mostly maintain their own aircraft. OEM-linked centres, notably Airbus Helicopters UK at Oxford and Leonardo facilities in Italy and Belgium on the overseas list, cover type ranges for their own products. The third group is independent maintenance organisations around the London airfields, the Midlands and the north, such as those at Redhill, Wycombe Air Park, Sywell, Farnborough, Denham and Leeds Bradford, which support private, corporate, police, utility and HEMS aircraft on A109, AW169, EC135, AS355 and light single types. For a parts supplier, the third group is where purchasing decisions are made locally; for an operator seeking a subcontractor, the type lines determine who is eligible.
Checks before subcontracting
- Confirm the reference number is on the current UK Part 145 report and not on the suspended or revoked reports the CAA publishes alongside it.
- Match the exact type and variant on the A3 line to your fleet, and read any limitation text.
- Check that the maintenance site you will use is listed under the organisation's sites, since line stations are approved individually.
- For engines and dynamic components, confirm separate B or C ratings, or plan to use the OEM network.
- If your aircraft are on an EASA register, a UK Part 145 approval alone is not sufficient; check for an EASA Part 145 approval as well.